CABLE

JOINTING KIT

CABLE SERVICES

ELECTRICAL TAPES

CABLE FAULT MACHINE

ACB - AIR CIRCUIT BREAKERS
AIR CIRCUIT BREAKERS are used in Incomer and Outgoing Feeders for LV Panels where high capacity Curent Switching is involved, It is available from 630 Amp to 6500 Amp with selectable KA ratings

APFC PANEL
Automatic Power Factor Controller - A Panel with the set of capacitor forming a bank. It is used to control the power factor in industry

BATTERY CHARGER
It is used to Charger the Batteries where ever Battery sets are installed, It is also defined by Voltage/ AH capacity.

BATTERY SET
It is used for DC supply source and widly used in Sub Stations , Plants. It is defined in Voltage / Ah capacity like 30 V/ 100 AH

SERVICE CONNECTION BOX

C & R PANEL
CONTROL AND RELAY PANEL are used in MSEDCL/MSETCL Sub Stations for Feeder & Transformer Protection purpose, It has a specific selection in 11 & 33 KV Level.

LOW VOLTAGE MOTORS
It is the device to run rotating equipment in the Industry, Agriculture and many other places, It is available up to 8 Poles and 315 Kw with different KW Ratings & mountings. Special applications motors are getting manufactured against the orders.

CAPACITORS
It is used to improve Power Factor in HV & LV electrical network and widely used in Industrial sector

CHANGE OVER SWITCHES
It is used to select the source where two supply sources are available, It is in ranges of 3&4 Poles.

COMPACT SUB STATION
COMPACT SUB STATIONS are used by HT consumer as a replacement of 11or 33 KV Substation, It’s a combined unit of VCB/ LBS + TRANSFORMER + LV PDB.

CONTACTOR
POWER & CONTROL CONTACTORS is the Part of LV Switch gear and used in Motor Feeder for Power and Control Circuits, It is available in various ranges

DETUNED REACTOR
It is used to prevent harmonics due to Resonance. It is used with Capacitor Circuit

LOAD BREAK SWITCH
LOAD BREAK SWITCH is used by HT consumer to protect the Transformer and available with 11 KV, Outdoor & Indoor type. Fuses are there to protect the load, Fuses are selectable.

DWC PIPE
DOUBLE WALL CORRUGATED PIPE is used in Cable Laying purpose, It is selected on the sizes of cables mostly on outer diameter of cable ,DWC Pipes are availabe in different sizes like 50/38, 120/103 etc, It is available with different IS standards also

DRIVE
It is used for variable speed applications in Industries, with various capacities.

FEEDER PILLAR
It is used by MSEDCL work to distribute the LV supply up to the consumer, It is in range of Feeder/ Service feeder, 2/3 way, 4 way, 6 & 8 ways.

DISTRIBUTION BOARD
It is used to distribute the Power Supply to various circuits or Equipments, it is available with Customized selection.

HDG CABLE TRAY
HOT DEEP GALVANIZED CABLE TRAY are classified in two category - LADDER and PERFORATED, With many sizes and thickness, It is used for Overhead Cable Laying.

HRC FUSES
HIGH REPTURING CAPACITY FUSES is used to protect the faults in Circuits and available with various Types and Current ranges.

HT SWITCH BOARD
HIGH TENSSION OR HIGH VOLTAGE SWITICH BOARD are used in industries to feed the high voltage distribution like transformer & motors it in range of 6.6 KV to 33 KV with customized combinations.

HV CURRENT TRANSFORMERS
HIGH VOLTAGE CURRENT TRANSFORMERS are used in outdoor sub station and widely used by electricity boards, it is classified in to 11& 33 KV of MSEDCL and HT Consumer, available with Specified and Customized Range of Ratios.

HV POTENTIAL TRANSFORMERS
HIGH VOLTAGE POTETIAL TRANSFORMERS are used in outdoor sub station and widely used by electricity boards, it is classified in to 11& 33 KV of MSEDCL and HT Consumer, available with Specified and Customized Range of Ratios.

LOW VOLTAGE PANEL
It is Used by HT Consumer and Industry to operate the Plant Equipments, It is in range of MCC/ PCC/ PDB with customized combinations.

HIGH MAST

LT CT
LOW VOLATGE ( LOW TENSSION ) CURRENT TRANSFOIRMERS are Used to operate the LT meters and used in Metering set it is availabe from ranges of 50/5 to 1000/5 as required.

LT METERS
LOW VOLTAGE ( LOW TENSSION ) METERS are used in LV Consumer connetions by MSEDCL and avavailbe with Ranges of 100/5 to 300/5 Amp.

MCCB
MOULDED CASE CIRCUIT BREAKER is a part of LV Switch gear and availabe in many ranges of Ampicity and Short Circuit Levels, It is sued to Protect the Circuits from Earth and Short Circuit Faults

MCVCB
METAL CLAD VACCUM CIRCUIT BREAKERS are used in indoor sub station and mostly used by HT consumers , it is in 11 & 33 KV level with specific normal & short circuit current ratings.

METERING CUBICALS
Used By HT consumer for measuring the energy Consumption and being monitored by MSEDCL authority. It is avavailabe in various ratios like 5/5 to 100/5 and Class 0.2S & 0.5 S, It is also clasified with Horizontal & Verticle sections.

METERING CUBICALS CT PT
CURRENT & VOLTAGE TRANSFORMER FOR METERING CUBICAL. It is a Part of Metering Cubical, Used by HT Consumers to replace the existing CTs & PTS in case of variances in Demand.

MINIATURE CIRCUIT BREAKERS
It is used in Lighting and Control Circuits and available up to 4 Poles with various Current ranges.

MOTOR STARTERS
It is used to start the motor Direct on Line, It is used up to 25 KW motors and widely used Agriculture Purpose.

MPCB

PCVCB
PORCELAIN CLAD VACCUM CIRCUIT BREAKERS are used in outdoor sub station and widely used by electricity boards, it is classified in to 11& 33 KV WITH 400 to 2500 Amp,SC rating is selectable like 13.2or 25 or 31 KVA

POWER TEMPLE
It is the Combination of LBS + METERING CUBICAL, It is avaialbe in range of 11 KV with specified Ratio and Incoming Combination, It is used by HT Consumer , in Compact places where LBS & Metering cubical can not installed separately.

RCCB
RESIDUAL CURRENT CIRCUIT BREAKERS is used to detect the Leakage Current and having very fast Tripping Characteristics.

RING MAIN UNIT (RMU)
RING MAIN UNIT is Used by MSEDCL For Distribution of 11 & 33 KV Level Feeders From One place, It is available with Selected Combinations of LBS & VCB.

SEMI CONDUCTOR FUSES
It is used to Protect the Power Electronics Circuits Like Diode, Triode, IGBTs, Thyristors.

SINGLE PHASE TRANSFORMER
It is Sued in MSEDCL Single Phase net work and available with 11 KV /0.250 KV 25 KVA capacity BIS Level 2.

STABILIZER
It is used to stabilize the output supply, where drastic voltage variation from source is there

STREETLIGHT POLE

SWITCH DISCONNECTOR FUSES (ISOLATORS)
It is Used to Isolate the Circuits from Main Power, Mostly Fuses are not there with Isolators, and shall be ordered separately, available in 3 & 4 Poles with various Current ranges.

THERMAL OVERLOAD RELAYS
It is used to Protect the Circuits from Over loading and available in different settings ranges.

AB CABLE ACESSORIES
They are used in Laying Aerial Bunch Cables from one Pole to another

AB SWITCH ACCESSORIES

AIR BREAK SWITCH
It is an essential unit of overhead line SYSTEM (DP Structure). It is used to disconnect the overhead line system from ongoing healthy distribution system for mainteance

ALUMINUM BOBBIN

CABLE GLAND
A cable gland is a device that attaches to the end of an electrical cable to secure it to a piece of equipment. Cable glands are also commonly referred to as cable connectors, cable fittings, cord grips, and cable strain reliefs. They are mainly used on cables which have diameters between 1mm and 75mm.

CABLE ROUTE MARKER

CLAMP & CONECTOR
These are used to terminate and connect conductor or cable to the equipment. they are mostly used in electrical networks in Substations / switchyards

CONDUCTOR
It is used in transmission and distribution system to transmit the electricity from generating station to distribution system to end user at different locations

CREAMPING TOOL
A crimping tool is a device that is used to make cold weld joints between wires and a connector through deforming one or both of them to hold the other. ... The weld joint properties (mechanical and electrical) are strong as the parent materials when the tool works and offer some result, which is known as crimp.

DANGER BOARD
These danger signs are used in more extreme situations where the employees are needed to tell about these potential hazards so that they can avoid personal injuries. These danger signs and symbols should make it clear that which precautions to take or what to watch out for.

DISCHARGE ROD
Discharge rod is an insulated pole, used by electric utility workers when engaged on live-line working on energized high - voltage electric power lines.

DO FUSE ELEMENTS

DROP OUT FUSE
DROP OUT FUSE SET is used for protection of equipments from current surges and overloads

DROP OUT FUSE ACCESSORIES
DROP OUT FUSE ACCESSORIES

DISTRIBUTION & POWER TRANSFORMERS
It is Used for Voltage Step up / Down Purpose and used in MSEDCL network and in Industrial sectors, It is available in 16 KVA 3 Phase to any capacity, BIS Level 2 Transformers are used up to 2500 KVA.

EARTH TESTER

DISTRIBUTION BOXES
Used in Low Voltage Net Work, and available in specific Ranges like 25 KVA to 200 KVA and customized ranges as required.

EARTHING
It is the foundation of every electrical system for safety of man and equipments. it provides the grounding system to substation / switchyards

DTC METER BOX
It is a part of metering Set and used to Install the meters and CT , it has a fixed dimensions and construction.

G.I PIN

HAND GLOVES
gloves worn to prevent and protect against electrical shock.

HARDWARE MATERIAL FOR DISK INSULATORS
It is used for stringing disk insulators in overhead line (Distribution or transmission system) at cut points or dead ends

HORN GAP FUSE SET
HORN FUSE SET is used for protection of transformer(DP Structure) Tapping Point.

HORN GAP ACCESSORIES
HORN GAP ACCESSORIES

HT FABRICATION
Fabrication is the process of making something from semi-finished or raw materials rather than from ready-made components. In other words, it is the process of making something from scratch rather than assembling something.

INSULATORS
Insulator that is used to Isolator Wire from physical support such as a pin on a utility pole or tower is known as pin type insulator & this type of insulator is used in 11kV/33kV Distribution/Line.

ISOLATOR
Isolator is a Mechanical Switching Device that in the open position allow for isolations of the input & output of a device. An Isolator is a use for isolating a circuit of Equipment of Source of Power.

KIT KAT

LIGHTNING ARRESTOR
Lighting Arrestor is Design to Protect the Electrical Equipment Mostly Outdoor.

LT FABRICATION
Fabrication is the process of making something from semi-finished or raw materials rather than from ready-made components. In other words, it is the process of making something from scratch rather than assembling something.

LUGS

MEGGER
An instrument that is used to measure insulation resistance is a Megger. It is also known as meg-ohm-meter. It is used in several areas like multi-meters, transformers, electrical wiring, Etc. Megger device is used since the 1920s for testing various electrical devices which can measure greater than 1000meg-ohms.

OPERATING ROD
Operating Rods can have multiple usage. In essence these are insulated rods used to pull out circuit breakers, check for voltage presence or attach earthing clamp. Used everywhere high voltage presence is expected to prevent harmful electrical shock.

RSJ POLE
RSJ Poles are used in Distribution Power Line, electric transmission lines, power sub stations and base frames.

RUBBER MAT

SAFETY MATERIAL

SPACERS
Electrical spacers (sometimes called insulating risers) are made of non-conducting materials that create and maintain spaces between electrical conductors and bus bars in equipment, electrical panels, and high voltage switching gear.

TAPE

WIRE
Used in Earthing and HT & LT Guarding in Distribution System.

SHACKLE HARDWARE

BIRD GUARD
It is used to protect insulator from bird movements

CONTROL PANEL & RELAY PANEL
C & R Panel is used to control electrical quipment as well as protection to the network

COUPLING CAPACITOR
It is used in PLCC communication to allow carrier frequency signal. It is always in combination with wave trap

CVT
It is used in EHV substation as potential transformers, to obtain a 110 volt supply for metering, protection and communication

EHV SUBSTATION EARTHING AUDIT
It is a service provided in switchyards/substations for grounding system to check the health of the equipments with the earthing mesh

EHV TOWER EARTHING
It is used to protect the man and material from electrical shocks

EHV TRANSFORMER BUSHING
It is a part of transformer where termination of the conductor is done

EHV TRANSMISSION LINE HARDWARE
The different hardwares are used in construction of the transmission line

HVDC BREAKERS
It is used in EHV - DC transmission system to protect system by interrupting

HVDC RECTIFIERS
It is used to convert AC to DC supply

ISOLATOR
It is used to isolate (separate) the circuit from the healthy system at the time of maintenance

LIGHTNING ARRESTOR
It is used to protect equipment in outdoor substation from lightning stokes

OVERHAULTING OF SF6 BREAKERS
It is maintenance to breakers to carry out thorough maintenance of SF6 breakers

RELAY
It is used for protection of equipment

RETROFITTING OF SF6 BREAKERS
It is a service provided for replacement of old to new make/version

SF6 CIRCUIT BREAKER
It is required to protect electrical power station and distribution system by interrupting electric current

SINGLE POLE SF6 CIRCUIT BREAKER
Complete single pole of SF6 circuit breaker can be supplied

TROUBLESHOOTING OF SF6 BREAKERS

TUNING UNIT FOR WAVE TRAP
It is part of Wave Trap to control frequency

WAVE TRAP
It is used to prevent high frequency carrier signal to enter in substations

AIR COOLER
Being a pioneer in product innovation, Havells has once again brought in a unique range of smart coolers with Breatheezee Technology TM.

AIR PURIFIER
Breathe fresh. Like never before. Bring home an AirPurifier which sets new standards.

BREWING
Kick start your day with a treat for your senses. Brew your own savory delight with our digital coffee makers and kettles.

CLIMATE CONTROL
Don’t let the icy floor and chilly winter air spoil the comfort inside your home. Keep it warm and lively with our room heating solutions.

COOKING
Be inspired to create culinary wonders and add a touch of magic with our range of cooking appliances.

FANS
A producer of numerous types of fans including exquisite, antique finishes to fans specially designed for kids to dual color fans and High Speed Fans, Havells entered the fan business in mid-2003 and since then, has never looked back.

FLEXIBLE CABLES
With extensive research and development along with the finest conclusions Havells has developed the best in class products and are addressing the continuously changing requirements of our treasured customers.

FOOD PREPARATION
Food preparation without the right set of appliances is like a knight without a sword. Explore our range and become a master chef of your home.

GARMENT CARE
Iron out all the wrinkles away from your delicate collection of clothes without damaging the fabric. Check out our irons and steamer.

INDUSTRIAL HEAVY DUTY FANS
The Havells industrial fan range presents you with Air circulators and heavy duty exhaust fans for all your industrial needs.

INDUSTRIAL PROFESSIONAL LIGHTING
Contributing productivity, safety and efficiency while lighting up industrial work places The most important aspect of any industrial area, be it assembly lines, warehouses, process areas and commercial complexes is lighting.

INDUSTRIAL SOLAR
A end to end complete , stable and reliable solar on grid solution to save on your electricity charges.

LIGHTING
Havells brings to you a wide range of energy efficient lighting solutions with the state-of-the-art products to choose from.

PERSONAL GROOMING
In the digital age when the number of right swipes on judges how good looking a person is, it is imperative to appear smart and stylish all the time.

PUMP
Dedicated to deliver comprehensive revolutionary pump services for agricultural, municipal, residential, petroleum, and industrial-commercial markets, Havells Pump comes with both horizontal and vertical pumps which provide complete underground water pumping solutions.

SOLAR
For 50 years our electrical products have given you peace of mind, now extend the same with Havells Roof Top Solution. Utilize your roof and save electricity through Havells state of the art roof top solution.

SWITCHES
A combination of elegance, simplicity and sophistication Built to create an impact and deliver excellent performance, our switches are inventively designed to last long and augment your walls.

WATER HEATER
The perfect remedy of fatigue, freshness and cleanliness is a warm water. Therefore, at Havells, we developed a range of taps that would relax you in seconds by providing warm water with a simple, gentle tap.

WATER PURIFIER
Bring back the good old habit of drinking plenty of water, but with absolute purity and health. Havells water purifier range features advanced purification technologies such as 100% RO and UV Purification, Double UV Purification, Mineralz Fortification, Revitalizer, iProtect purification monitoring, and more.